Establishment and manufacturer selection of pneumatic lifting tower

Time：2020-07-14 View：

Brief illustration on the establishment of pneumatic lifting tower
1. The structural features of the pneumatic lift communication tower are three vertical pneumatic lift masts, each of which contains multi-stage cylinders, and the bottom one cylinder is fixed in the structure of the mast, there is a lock at the joint of each stage of cylinder, and a connecting plate is set at the top of each stage of cylinder, and a connecting rod is set between the mentioned connecting plates adjacent to the same level, the connecting plates are connected through the cable crossing.
2. The mast structure is fixed on the base station cabin. The base station cabin can be made of steel or reinforced concrete. The cabin should have concrete foundation. The bottom of the mast structure can be directly connected to the foundation, and can also be connected to the foundation through the cabin; The upper part of the structure can be connected to the cabin.
3. The establishment process of pneumatic lifting tower can be briefly described:
1) fix the mast. Fix the mast with the cabin and ensure it straight.
2) establish the top-level connecting plate and further fix it through connecting rod.
3) install the communication facilities on the top of the tower
4) use the air pump as the power source to inflate the mast, rise step by step, and build the steel rope layer by layer.
For each rising section, install and fix a layer of connecting plate, and fix the tower layer through the cable.
This process only requires air pump, three or four workers, and no other large mechanical equipment.
Currently, the representative manufacturers of pneumatic lift rods take pneumatic, electric and hydraulic as representative commodities respectively. However, it is common in the world that the initial electric lifting method has been replaced, and the gas pressure type of power supply with more stable stability has been chosen, which has won Common praise from customers all over the world for its light, stable and negative features.
The following is an introduction to some information about the use and equipment of the pneumatic lift rod. You can also specifically log on the company's homepage to read the pneumatic lift rod.

Product Introduction
Pneumatic lift rod is the lift mast equipment provided by professional mobile lighting equipment. It is widely used in various fields such as public security, fire protection, communication, climate, municipal construction, various natural disasters, on-site night rescue and rescue of Emergency Events and so on; It can be equipped with news interview vehicles, relay vehicles, police command vehicles, emergency communication vehicles, other special vehicles and other types of vehicles; They can also be used as lighting carriers in sports places.
When the client equipment chooses the pneumatic lift rod, the initial height, the maximum rising height and the maximum load of the lift mast should be determined according to the height from the surface to the top of different types of equipment. It is convenient for the company to carry out personalized customization according to the needs of customers and cater to the solutions of customers;
When the pneumatic lift rod is installed on the top, its initial height is the shortest, ensuring the maximum height of the car body and reducing the wind resistance of the equipment as much as possible.
The pneumatic lift rod can be customized according to the customer's request, with a height of 1-35 meters and a maximum load of 350 kilograms.
Pneumatic lift rod equipment method
Put the pneumatic lift rod equipment on the top or surrounding of the equipment, and vertically lift the lamp equipment, camera equipment, antenna equipment, etc. to the high altitude to complete the lifting equipment for the client's reservation function. It can also be completed by reinforcing the triangular bracket at the bottom. The mobile lifting and dropping can be completed by opening the chassis of the triangular bracket and manually or actively lifting the rod during the operation.
The pneumatic lift rod is fixed through opening holes on the car roof, or the equipment is around the car, and is jointly fixed by the mop and support frame.
Material illustration
The lifting rod adopts high-strength 6063 aluminum alloy profile, and the surface is subject to anode hardening treatment, which has higher hardness, film thickness, abrasion resistance and corrosion resistance.
In addition, our company first completed the built-in pneumatic lift rod inside the power line, which is a preemptive skill in China and further in beauty and performance.