Vehicle antenna lifting equipment system and technical parameters

Time：2020-08-18 View：

Introduction of vehicle antenna lifting system
Product description:
General-purpose lifting rod is a multi-section telescopic rod with cylinder as the core independently developed by our company. This product is characterized by multi-section synchronous scaling, high load, high adaptability, low failure rate, low shaking rate, etc. It can replace hydraulic pressure, screw rod and other telescopic devices, in lifting, lifting, the erection field has a very broad application prospect.
Application fields:
Military communication, missile, radar antenna lifting device; Public security security lifting monitoring; Fire night emergency lighting; Mobile lifting lightning arrester; Lifting and lifting equipment, etc.
Technical introduction:
In terms of working principle and technical characteristics, this mast is equivalent to a multi-section cylinder. When in use, by injecting and discharging air into the cylinder, the rising and falling movements of each cylinder are realized.
Each cylinder is made of high quality aluminum alloy material. The whole manufacturing process has gone through multiple technological technologies such as extrusion molding, cold drawing, honing, machining, anodic oxidation and so on, and has gone through strict inspection procedures, to ensure the quality of the mast.
If you want to know the structure of the mast, please refer to the structure diagram of the mast. If you want to know more, please refer to the relevant technical instructions or contact Nanjing Xuedian company. You will find the advantages of this mast are: simple structure, but precise manufacturing process, so it is convenient to use and stable in performance, and is your ideal product.
The mast specifications are determined according to the number of nodes, maximum node OD, initial height, and maximum height. Different mast specifications have different technical performance.

Technical parameters:
Maximum lifting height (unfolded height):1-30M (can be customized according to requirements, see the attached table for common specifications);
Closed height: 500MM-4000MM (customizable);
Load: maximum load 500Kg, minimum load 5Kg (refer to common specifications);
Lifting Time: 2-3 M/min;
Maximum deflection angle: 5 °;
Maximum torsion angle: 45mrad;
Wind resistance level: Level 8 wind energy works normally, and level 10 wind does not damage;
The above parameters are all the parameters of the general model lifting rod of the company.